How Much Does It Cost to Rescreen a Pool Enclosure?
Average Cost to Rescreen Pool Cage by Size and Material
When you calculate the total cost to rescreen pool cage structures in Southwest Florida, the overall surface area of the mesh is the primary driving factor. Screening contractors typically measure both the roof and side wall screen panels to determine the overall square footage. Complete rescreening projects generally cost $7 to $9 per square foot for total enclosure surface area, which covers both labor and materials.
For a standard single-story pool cage covering a 600-square-foot footprint (which equates to roughly 1,200 to 1,500 square feet of actual screen material across the roof and walls), total prices typically range between $1,200 and $3,800. Larger enclosures surrounding custom pool decks, lap pools, or multi-story lanais in Sanibel or Bonita Springs can reach between $3,500 and $7,000+.
For additional context on broad state averages and full structure replacements, see this detailed Florida Pool Cage Replacement Cost Guide.
Here is a breakdown of common screen mesh materials, their expected lifespans in our humid coastal environment, and installed cost ranges per square foot:
| Screen Material Type | Expected Lifespan | Installed Cost per Sq. Ft. | Primary Features & Best Uses |
|---|---|---|---|
| 18×14 Fiberglass Mesh | 7 – 12 Years | $0.85 – $1.50 | Standard builder-grade mesh; economical but susceptible to UV breakdown. |
| 20×20 No-See-Um Mesh | 10 – 15 Years | $1.60 – $2.50 | Tighter weave keeps out tiny biting midges and sand fleas near water. |
| Polyester (Phifer SuperScreen) | 20 – 30 Years | $1.20 – $1.80 | High tear strength, puncture-resistant, holds up extremely well against UV rays. |
| Pet Screen (Heavy Vinyl Polyester) | 15 – 20 Years | $2.20 – $3.50 | Heavy-duty weave built to withstand dog claws, cat scratches, and wildlife. |
| Florida Glass (Vinyl-Laminated) | 10 – 12 Years | $2.20 – $3.50 | Opaque privacy screen that keeps out dirt, rain, and lawn debris along lower panels. |
| Stainless Steel Mesh | 30+ Years | $4.00 – $6.50+ | Ultimate durability and corrosion resistance; excellent choice for coastal exposure. |
Standard Screen Materials and Lifespans
Choosing the right screening material significantly impacts the overall cost to rescreen pool cage setups over time. While basic 18×14 fiberglass mesh offers the lowest upfront cost, Southwest Florida’s intense ultraviolet light and salty breeze break down fiberglass binders, making screens brittle after 7 to 10 years.
Upgrading to premium materials delivers far superior longevity:
- Polyester Screen Mesh: Products like Phifer SuperScreen feature a heavy vinyl coating over polyester yarn. Polyester resists UV degradation, algae, and mildew while retaining its elasticity. It carries a lifespan of 20 to 30 years, making it an exceptional investment for long-term homeowners.
- No-See-Um (20×20 Mesh): If your home sits near the water on Pine Island or near North Fort Myers canals, tiny biting midges (“no-see-ums”) can slip right through standard 18×14 mesh. A 20×20 weave stops these pests while maintaining airflow, though it costs slightly more per square foot.
- Pet Screen: Designed specifically to handle clawing pets, pet screens are seven times stronger than traditional fiberglass. It is ideal for lower side panels where dogs or local wildlife frequently press against the mesh.
To explore options tailored to your home, check out our Fort Myers Pool Rescreening Services.
How Size and Accessibility Impact the Cost to Rescreen Pool Cage Structures

Size isn’t the only structural variable. The layout, style, and physical accessibility of your enclosure directly dictate labor efficiency and equipment requirements.
- Enclosure Height & Stories: Single-story pool cages are straightforward to service. However, two-story enclosures or mansard cages that span double-height outdoor lanais require specialized staging, ladders, or safety harnesses. Working at higher elevations increases total labor costs by 20% to 35%.
- Roof Style Complexity: Flat or shed roofs are simple to screen. Mansard, dome, hip, and gable roofs require intricate angle cuts, extra climbing, and additional spline tucking, which adds time to the job.
- Attached vs. Freestanding: Attached enclosures (which tie directly into your home’s fascia or roofline) often cost up to 20% less to rescreen than freestanding structures because one full side consists of the house wall rather than additional screen panels.
- Panel Location Accessibility: Roof panels are always the most labor-intensive to replace ($50 to $65 per panel for individual fixes), whereas side wall panels ($40 to $50 per panel) and bottom kickplate panels ($25 to $35 per panel) are easier and safer to access.
Minor Screen Repairs vs. Full Pool Cage Rescreening
When you notice a tear in your pool enclosure, you must decide whether a minor repair makes sense or if a complete rescreen is necessary. A single minor repair—such as replacing two or three damaged side panels after a storm—typically costs between $200 and $600, with contractors usually charging a minimum trip fee of $100 to $200.
However, if your enclosure is over 8 to 10 years old, replacing panels piecemeal quickly becomes an expensive game of chase. For an overview of repair vs. full replacement trade-offs, read this helpful resource on How Much Does It Cost To Rescreen Or Repair A Pool Enclosure?
Signs Your Pool Enclosure Needs Immediate Attention
If you are unsure whether your cage needs simple touch-ups or a full rescreen, inspect your structure for these warning signs:
- UV Brittleness: The screen feels dry or rough to the touch and tears easily under light finger pressure.
- Color Fading and Silvering: Dark charcoal screens turn light gray or silver as the protective vinyl coating wears off.
- Spline Pop-Out: The rubber spline holding the screen into the aluminum groove is dry-rotted, shrinking, or hanging loose from the channels.
- Algae and Mildew Staining: Heavy green or black organic build-up that cannot be washed away without damaging the delicate mesh.
- Frame Oxidation & Chalking: White powdery oxidation forming along aluminum purlins and super gutters, indicating aging paint and deteriorating fasteners.
Glass Panel Enclosures and Specialty Screen Options
Some pool structures feature rigid vinyl or glass panels instead of standard porous screen mesh. Heavy glass enclosures or acrylic wall panels create three-season sunrooms, but they carry significantly higher repair costs.
Replacing damaged glass panels averages $45 to $65 per square foot in material and labor, compared to standard screen mesh at $5 to $15 per square foot. Labor for glass installation runs up to $50 per hour due to panel weight and handling care.
Homeowners looking for privacy often opt for Florida Glass, a solid vinyl-laminated screen material. Florida Glass prevents neighbors from seeing inside while keeping dirt, grass clippings, and pool chemicals contained. Adding Florida Glass along bottom panels typically costs $2.20 to $3.50 per square foot.
If you are considering enclosing an open porch or converting a covered lanai into a solid living area, see our detailed breakdown on How Much Does Enclosing a Lanai Really Cost?
Additional Expenses That Influence Total Rescreening Project Costs

When contractors strip off old screening, the bare aluminum frame is fully exposed. This creates an ideal opportunity to address structural issues, paint wear, and fastener corrosion.
Common auxiliary costs during a rescreening project include:
- Rotten Wood, Fascia, and Soffit Repair: Where the aluminum enclosure connects to your home, water can collect over time. Repairing rotten fascia or soffit framing costs between $9 and $28 per square foot.
- Pool Cage Frame Repainting: Instead of paying $14,000 to $24,000 to tear down and replace a sound structural frame, repainting an oxidized aluminum cage costs roughly $1.50 to $2.50 per square foot (around $1,500 to $2,500 total).
- Super Gutter Installation or Repair: Replacing rusted or leaking super gutters that funnel rainwater away from your house roof ranges from $1,500 to $2,500.
- Pool Door Hardware & Screen Door Replacement: Installing new heavy-duty door closers, hinges, and latches costs $50 to $150 per door, while replacing complete screen doors runs $250 to $450.
To learn more about strengthening your structure against violent coastal weather, read our guide on how to Hurricane-Proof Your Screened Enclosure Guide.
Labor Rates, Hardware Upgrades, and Permit Requirements
Labor costs for screening technicians in Cape Coral and Fort Myers generally range from $35 to $50 per hour. Most full rescreening quotes combine labor, screen roll materials, rubber spline, and trash disposal into a comprehensive square-foot estimate.
During a full rescreening, we strongly advise upgrading your enclosure’s structural fasteners. Standard steel screws rust quickly in Florida’s salty air, leading to ugly rust streaks and structural failure during high winds. Upgrading to stainless steel fasteners or Pro-Tect coated screws adds $1,000 to $2,500 to the total project, but extends frame life for decades.
In SWFL communities like Bonita Springs and Sanibel, minor screen repairs do not require municipal permits. However, if your project involves replacing structural aluminum members, updating tie-downs, or converting screen walls into solid panels, local building codes mandate permits and engineering inspections to verify wind load compliance (130 to 150 mph design ratings).
DIY vs. Hiring Professionals for Pool Cage Maintenance
It is tempting to look at rolls of screen mesh at a home improvement store and consider a DIY rescreening project. Standard DIY screen rolls cost roughly $0.20 to $0.50 per square foot for raw materials.
However, rescreening a complete pool enclosure yourself carries substantial challenges:
- Safety Hazards: Walking across narrow aluminum purlins 12 to 20 feet above a concrete deck or swimming pool requires safety gear and experience.
- Screen Tensioning: Getting uniform, drum-tight screen panel tension without puckering or bowing the aluminum frame requires proper spline rolling techniques.
- Time Commitment: What takes an experienced two-person crew two days can easily take an inexperienced homeowner several weekends.
For detailed material specs and DIY versus pro trade-offs, explore our Pool Cage Screening Options guide.
Frequently Asked Questions About Pool Enclosure Costs
How long does a pool cage screen typically last in Florida?
In Southwest Florida, standard fiberglass screens last between 7 and 12 years. The combination of intense ultraviolet rays, rain, and salty air causes fiberglass mesh to become brittle, lose color, and tear. Higher-grade polyester screens (like Phifer SuperScreen) last 20 to 30 years, while heavy stainless steel screens can last 30+ years with minimal degradation.
What is the average labor cost to rescreen pool cage panels?
Labor rates for basic screen repairs average $35 per hour, while complex roof panel or multi-story glass installations reach $50 per hour. Most contractors set a minimum service charge of $100 to $200 to cover trip fees for minor single-panel repairs. For a complete rescreening, labor accounts for roughly $2.00 to $3.50 per square foot of the total $7 to $9 per square foot project pricing.
Is pool cage rescreening covered by homeowners insurance?
Standard wear-and-tear, UV age degradation, and animal damage are not covered by homeowners insurance. However, if your pool cage screens are torn during a windstorm or hurricane, repairs may be covered under your policy’s Coverage B (Other Structures) or main dwelling policy. That hurricane deductibles (typically 2% to 5% of your total home insured value) apply before coverage kicks in.
Conclusion

Understanding the total cost to rescreen pool cage structures comes down to balancing material quality, enclosure size, and structural condition. While minor repairs average $200 to $600, invest in a full rescreen ($1,200 to $3,800 for typical single-story enclosures) when multiple panels show UV damage or loose splines. Choosing premium polyester mesh and stainless steel fasteners protects your investment against harsh Florida weather for decades.
At Aluminum Concepts Construction, Inc., we specialize in high-quality aluminum pool cages, custom lanais, gutters, and complete rescreening services across Fort Myers, North Fort Myers, Fort Myers Beach, Cape Coral, Bonita Springs, Sanibel, and Pine Island.
Whether you need a simple screen refresh or frame restoration, explore our Custom Pool Cage Enclosures, review our options for Fort Myers Screened Rooms, or browse our complete selection of Professional Pool Screening Services to request a professional quote today!
Comments are Disabled